Free IPAD 2!!! Click Here
DroidX Gingerbread 2.3.3(4.5.588) Install Patch with Root
This is the most recently leaked Gingerbread build for the DroidX phones.
Droid X 2.3.3. (4.5.588)You must follow the directions exactly to the letter, if you do not I can not guarantee the results. Please do not post questions here if you have not read the directions below. Before beginning ensure that you understand the directions that you have read.
Good now that you have read above the you are ready to proceed.
1. Your phone must be in the following condition before you can use the patched updater.
- Your phone is running the 2.3.340 official FroyoFirmware
- Your phone has been rooted
- Your phone is using the Droid2 Bootstrap program (Do Not Use DroidX Bootstrap)
2. Have you gotten your phone in the proper state to upgrade to the newest leaked Gingerbread. Yes go ahead, if No go back to step 1.
- Download all 3 files and place on the root of yoursdcard.
Install File Part 1
md5 = 55903982607d3b1b22b3b9f3af1ff807
size = 99.1 MB (103875449 bytes)Download Part 1 – Mirror 1
Download Part 1 – Mirror 2
Download Part 1 – Mirror 3Install File Part 2
md5 = a021e4e0dffb39018bdabf7e679f4d35
size = 16.2 MB (17028214 bytes)Download Part 2 – Mirror 1
Download Part 2 – Mirror 2
Download Part 2 – Mirror 3Install File Part 3
md5 = 7cb97560c1f757ad2b9ccd131200911b
size = 220.7 KB (226025 bytes)Download Part 3 – Mirror 1
Download Part 3 – Mirror 2
Download Part 3 – Mirror 3- Restart the Droid2 Bootstrap in recovery mode.
- Install all three zips files in order. DO NOT LEAVE RECOVERY UNTIL ALL 3 HAVE FINISHED BEING INSTALLED.
Most testers have installed this over the of 2.3.340 firmware without the need for a wipe, about 15% did wipe, the choice is yours.
Those running the 4.5.573 Leak1. Perform a backup using clockwork recovery
2. Downgrade to the 2.3.340 firmware
3. Follow the above procedure to upgrade
4. After upgrading enter into Bootstrap recovery
5. Perform an Advanced Restore —-Select DataDeodexed Version For Devs and Themers (Can be use by anyone)This installs over the top of the previously installed 2.4.588 or over 2.4.573
Download 1
Download 2
Download 3
Download 4______________________________
To Help support the site please consider becoming a supporting member.
DroidModderX 
Hey,
Right when it started rebooting (the red moto symbol) it cut out and went to this weird message saying:
Bootloader
D2.37
Battery OK
OK to program
Connect USB
Data Cable
How do i fix??? Please help!
You will have to sbf your phone check out my tutorial if you dont know how
i followed the tutorial and got the same message as the guy above
is this the tutorial you are talking about?
if i sbf my phone, will it remove my root
Yes if you follow that guide and sbf you will kill root…ur phone will be out of the box state
so after I sbf it, I can root it?
i’m just trying to root my 2.3.3 android
After u sbf root it via z4root, then install d2 bootstrap, then installed the 2 part patched 596 update
when you say “place on the root of my sd card” what do you mean? they’re on my Sd card but I see no folder that says root
Terry… On the root of sd means…not in a floder or directory, but directly on the sd
oh last question does “Restart the Droid2 Bootstrap in recovery mode.” mean to use Reboot recovery or to use bootstrap recovery
lol ok perfect yeah exactly where it needs to be
oh last question does “Restart the Droid2 Bootstrap in recovery mode.” mean to use Reboot recovery or to use bootstrap recovery
Yes sir
hey guys and thanks for the tutorial! what i’m comfused on is there are 3 file parts and 3 mirror parts under each file. my question is do i download all 3 parts and all the mirros from each part so a total of 9 mirrors? or just 1 mirror from each part and if so which ones?
You just ned one of each ofthe 3 files
Hey, a few questions:
1) The video is not showing up in my browser (tried firefox and safari) any chance you could get it back up and running?
2) Do I need to wipe data, clear cache, and do any other type of wipe (dalvik, etc.) before installing these files? Sounds like I should for a cleaner install.
3) Since I’m installing a new OS (.340 -> .588) does it make any sense to make a backup in recovery?
4) These files should all be put on my SD as zips (not unzipped), correct?
Hey, just caught this video over on youtube, so questions 1 and 4 are answered! Still wondering about wiping data, cache, and dalvik before installing – and whether to make a backup in recovery. Thanks!
Creaky… Id wipe data since you are coming from froyo… And your nandroid backup wont be any good once you get to gb… In otherwords if you recover your froyo backup coming from gb it will fail due to the fact they are built on different frameworks, hope that made since
how to u downgrade to that specific firmware when backing up in clockwork from .57
fresh.. im not sure i understand the question… if you want to flash a nandroid backup.. just go into clockwork mod and select Restore and choose your nandroid backup
Can I do this on my droid 2??? I have already Installed Liberty Gingerbread v0.1 tried to install v0.2 but when it rebooted it said it was still in one…I have the pro version of Liberty toolbox but I always have to pull it out of my files on my sd card..?? SOooo long story short how do I get to Liberty V0.7??
I’m a little confused here. I’m on Gingerbread 2.3.3 (4.5.573) rooted. Where it says:
5. Perform an Advanced Restore —-Select Data
What exactly do you mean? Do I just need to find the zip and install it or what?
In other words just do a data wipe from bootstrap
Ahh Ok. Then after that should i go back to install zip from sd and install the deodexed or reboot?
Yes install the deodexed
How do i know which mirrior # to download, Is there a difference from them, becuase i only see you downloading one from each stage to phone, how do u know which one to choose?
I mirror is just a different place to get the same file
i was coming from 2.3.340 official Froyo to this, and it aborted the process of installing part 1 saying: “needs pach” or something about patch. Is there a patch needed before i go further do this?
I got the same error.
Yes if ur getting an eror ..make Sure ur files are not corrupt…redownload them to your PC then xfer to sdcard make sure you flash all 3 files in the same d2bootstrap session
I tried all 3 different mirror files for part one. Each one of them gives me the same error “assert failed: apply_patch_check……” . I have dx 2.3.340 and I rooted it with z4. I was in d2bootstrap when I tried this.
Did you download to PC first then xfer to Asgard?
yes i did
Was there ever a fix to this?
I’d sbf for a clean slate and try again…the files are good I’ve used them before…or the better option would be to sbf, z4root, install d2bootstrap and flash the 2part patched 4.5.596 its the same as ota gb but its prerooted
i am totally lost…where can i find step 1?